With its high efficiency, raft of built in safety-features, and elegant battery-ready design the Sigen Hybrid Inverter works well as the lynchpin of any solar PV system for homes and small businesses.

This Single Phase Inverter comes with models from 3kW – 6kW, and can work with solar panel systems up to 12kW in output capacity. This is more than enough for any residential needs.

  • 98% efficiency of power conversion
  • Easily upgraded with Sigenstor Solar Battery
  • Inverter & batteries combine to single unit
  • High protection from fire, dust, and water

High Efficiency Power Conversion

The primary job of a solar inverter is to convert the DC electricity generated by solar panels into AC which can be used in the home. Minimising the amount of power lost in the conversion is essential for getting the most out of a solar PV system.

The Sigen Hybrid Inverter boats a 98% maximum efficiency level, ensuring that little electricity is lost in translation.

Easily Battery Upgradable

The Sigen Hybrid Inverter is designed to fit together elegantly with the Sigenstor Solar Battery System. 

The inverter acts the control unit for up to six battery modules which can be combined into a single stack of up to 48kW of storage capacity.

The battery system can be easily upgraded after the inverter has been installed, simply stacking on new battery modules as you go.

Combine Multiple PV Strings

Not all roofs are able to have many solar panels located in a single place, and may have to have more than one cluster of panels running on different strings.

The Single Phase Sigen Hybrid Inveter is capable of running two Maximum Power Point Tracking (MPPT) algorithms simultaneously, with one PV string for each MPPT.

This means that for awkawarly shaped roofs, or those with an east-west inclination, two different PV strings can run through a single inverter.

Online Solar Assessment

Speak with a member of our team and determine the type of solar that best suits your situation

  • Fill in the solar assessment

  • A solar expert will call you with 24 hours and ask any questions they have

  • We will email across accurate quotes, detailing the timeframe, costs, available grants and next steps

LED Indicators

The LED display on the front face of the Sigen Hybrid Inverter contains display status for different elements of the solar PV array.

The colour of the display icons indicate the current status of the Signal (connection to management system), DC Connection, AC Connection, Battery Storage, and DC Charger.

Mobile Management System

The Sigen Hybrid Inverter and Sigenstor Battery Storage system can be monitored and controlled directly through the MySigen App management system on mobile and desktop platforms.

MySigen allows for easy monitoring of the inverters performance, control of different operating modes, along with remote troubleshooting of any problem.

Get a Quote for Rooftop Solar

Take our 90-second online assessment and we’ll connect you with a recommended solar installer. It only takes 90 seconds and it’s 100% cost and commitment free.

Electrical Protections

The Sigen Hybrid Inverter comes with multiple layers of protection from electrical mishaps which may occur in your home’s solar power system.

Long-distance Arc Fault Circuit Interrupter (AFCI) systems will cut the power if it detects a loose electrical arc from frayed wiring which could pose a fire hazard. 

The system also comes with built in DC reverse polarity protection, Insulation monitoring, Residual current monitoring, AC overcurrent/overvoltage/short-circuit protection, Type II DC/AC surge protection, and Anti-islanding protection.

Superior Reliability

The Sigen Hybrid Inverter is protected from external damage as well as from electrical issues. An IP66 ingress protection rating guarantees that the device is completely protected from dust or other particulate matter getting inside, as well from external water damage.

FAQs

Sigen Single Phase Hybrid Inveters come with a 10 year product warranty

The Sigen Hybrid Inverter has dimensions of 700mm x 300mm x 268mm and weighs 18kg.

The Sigen Hybrid Inverter can be installed in both indoor and outdoor locations. If located indoors it should be in an area with natural convection for cooling. If outside the inverter should be in a location sheltered from rain and direct sunlight.

Get a Free Solar Quote!

Find your recommended installer, and get your free quote today.

Vetted solar companies:

  • SEAI Authorised
  • SafeElectric Certified
  • Fully Insured
  • 1,000+ Installations
  • Tier-1 Materials
  • Dedicated Customer Care
  • Fully Vetted
  • Competitively Priced
  • Free Site Assessments

Vetted solar companies:

  • SEAI Authorised
  • SafeElectric Certified
  • Fully Insured
  • 1,000+ Installations
  • Tier-1 Materials
  • Dedicated Customer Care
  • Fully Vetted
  • Competitively Priced
  • Free Site Assessments